Whether placed by a drawing setup command or by the Drawing Border tool, drawing border properties are displayed in the Object Info palette, where they can be edited.
Most of the drawing border properties are documented in Adding a Drawing Border. Only the parameters which apply to VectorWorks Design Series products are described here.
|
Opens the Import Title Block dialog box, for selecting a title block symbol to insert (see Adding a Title Block). ASME title blocks are required to insert a tolerance or projection block.
 Additional default title blocks are available with the Designer Series products; for US Arch title blocks, information is linked to the Issue Manager.
|
|
|
For ASME drawing borders, adds a tolerance specifications block to the title block. The tolerance block creates a legend containing the drawing tolerances, including both angular and linear accuracy.
 |
|
|
For ASME title blocks, adds a projection block area to the title block; specify the First Angle or Third Angle projection
|
|
|
(Machine Design required)
|
Adds a parts list to the title block (this is intended for ASME title blocks, but can be added to any title block). Information from detail bubbles populates the parts list; see Creating Detail Bubbles. If a parts list worksheet does not yet exist, it is created.
|
|
Opens the Edit Title Block dialog box, for specifying the title block information. Depending on the selected title block, different fields and tabs are available. ASME title blocks include a tolerance tab, for editing the tolerance block information. US Arch title blocks include Project and Sheet tabs; information is entered from the Issue Manager but can be edited manually. Any title block that contains a Project tab can have the same Project tab information applied to all title blocks in the file by selecting Apply these values to all title blocks.
|
|